May 17, 2012 So either the ECM8000 is a diffuse field mic, comes with calibration files to simulate either types, or it should be pointing towards the speaker (if it´s a free field mic that measures flat at 0 deg incidence). Since it´s a small capsule mic it won’t matter much except in the highest frequency range so don´t lose any hair over this. At the moment I use ECM8000 with a calibration file which I. Buy Behringer ECM8000. It doesn't come with a calibration certificate which. Works well with Smaart software and REW software.It does have a little noise around. Using MiniDSP UMIK-1 to Calibrate a Behringer ECM-8000. I used the raw response. RealTraps - Measuring Microphones. I use an ECM8000. Steps I have done: 1. I have calibrated my sound card (connect output 1 to input 1 for that). I struggled with a loopback, it appears that the sound coming from out 5 to in 5 on the sound card is really low 3. I loaded the ECM8000 calibration file Until this is appears ok with the exception of 2.
Measurement Microphone Recommendations
USB Microphone Recommendations
For convenience and ease-of-use, a USB-connected measurement microphone can't be beat. Many of these mics come with a calibration file that ensures proper frequency response for measurement purposes.
The UMIK-1 is a 'Plug & Play' omni-directional USB microphone designed for acoustic measurement. This microphone provides low noise and accurate results you can rely on. Forget about driver installation, OS compatibility and un-calibrated mics. The Umik-1 is a USB Audio class 1 device automatically recognized by the Mac Operating System. After purchase, you can download a calibration file specifically for your UMIK-1 ensuring an accurate measurement.
Ships Worldwide
Analog Microphone Recommendations
Many analog microphones are useable with iRC Measure. Most all measurement - worthy analog mics require a pre-amp with phantom power and a female XLR (from pre-amp) to male 3.5 mm stereo adaptor (to your Mac line input) to operate. Contact your mic's manufacturer to find out if your mic is suitable for measurement use.
The CEntrance MicPort Pro is an easy way to incorporate your analog mic into the digital realm. Simple plug-and-play integration with your Mac, studio-quality specs, phantom power for condenser mics and appropriate sample rate support, this pre-amp is perfect for use with with iRC measure.
XTZ Audio has a cost-efficient USB-connected microphone kit that includes a the calibrated mic, USB pre-amplifier, cables, clip, and storage case.
Behringer Ecm8000 Calibration File Rewind
Download the XTZ Mic Pro Calibration File
Note: the XTZ will work with both Dirac Live and iRC Measure.
Note: the XTZ will work with both Dirac Live and iRC Measure.
![Ecm8000 Ecm8000](https://www.hometheatershack.com/forums/attachments/spl-meters-mic-s-calibration-sound-cards/1704d1168396342-behringer-ecm8000-mic-ub802mic.jpg)
If you already have a microphone pre-amplifier, we recommend the Behringer ECM8000.
Click here for ECM 8000 Information
Click here to download the ECM 8000 Calibration File
Note: the XTZ will work with both Dirac Live and iRC Measure.
Click here to download the ECM 8000 Calibration File
Note: the XTZ will work with both Dirac Live and iRC Measure.
Praise for iRC
'iRC rocks! It clears out room idiosyncrasies and brings out the hi-fi!!'
Behringer Ecm8000 Calibration File Rewrite
![Behringer Behringer](https://www.gearslutz.com/board/attachments/studio-building-acoustics/319839d1354639026-ecm-8000-miccal_ecm8000.png)
'With Impluse Response Correction the musical image has just widened massively, with a much tighter audio performance...'
'...simply masterful — this is the best that my 2-channel system has ever sounded!'
PreviousNextCopyright © 2001 Sonic Studio, LLC. All rights reserved.